Best Miter saw reviews:10, 12 inch for all budget homeowner
When you are making a super craft or a nice interior work to your house or office, with wood or any other metallic materials, the cutting and carving should be perfect. In such cases, the very first thing comes into most of the makers mind is miter saw. Its versatility gives not only a precise cut but also a good-looking output with any type of incise. After tedious testing and researching of number of brands and models for 102 hours, we have shortlisted 6 best miter saw brands that are worth to buy in 2020. Check top selling miter saw in Amazon.
Though few power tools and small saws are more than enough to work on bird houses and wood works. But, if you seriously want to indulge in huge works and projects where more angular cuts are demanded, the miter saw is a must and should thing accompany in your work journey.
It can be easily used by both professionals and DIY exercisers. If you are looking for the great miter saw stands follow this link. Read buying guide for choosing best miter saw blade in 2020.
Since it is an important addition to any work site, there are lots of brands and varieties are available according to user’s requirement. Click here to check comparison of DEWALT dws779 vs dws780. Also check comparison of Bosch GCM12SD vs. Dewalt DWS780 vs. Makita LS1216L vs. Festool Kapex Miter saw.
Top rated Miter Saws
- 1Hitachi C10FCE2
- 2DEWALT DW715
- 3Hitachi C10FCG
- 4DEWALT DWS780
- 5Bosch GCM12SD
- 6DEWALT DCS361B
Miter saw Reviews
We have reviewed below different types of compound miter saw, Sliding, single and double bevel etc. with pros and Cons. Check reviews of dewalt DW717, makita ls1216l, bosch gcm12sd.
Sliding Compound Miter saw
Compound Miter saw
Sliding Miter saw
Best Compound Miter Saw review
Hitachi C10FCE2 is a 10 inches miter saw with 15 Amp motor that shows its intense power in precise and toughest cutting jobs. Its motor generates no-load speed of up to 5000 RPM for cross cuts. Read Hitachi c12rsh2 review by real customer who used for 2 years.
The vibration reducing elastomer grip for the horizontal handle gives a good comfort and secures you all the time. The build-in clamps and the spacious tables bestow the stable guide and sturdy support to hold the material in right place without voluntary movement.
Required adjustments in it can be done with the thumb actuated positive miter stops at the range of 0 to 52 degrees left and right. With the help of these setting, the crown moulding and other trim pieces can be done by simply changing the angle of the cutting blade.
It is also having the bevel adjustment range of 0 to 45 degrees to the left. This miter saw can accommodate the large work material up to 2-5/16-inches high and 5-21/32-inches deep. It is very lightest among 10 inches compound miter saw weighing just 26.3 pounds.
The special feature of dust collecting section reduces the dust and tiny particles produced while cutting with the easily accessible carbon brushed for long term performance. This is the finest compound miter saw in the market.
It is having flexible miter angles and compound cutting capability for trim carpenters, framers, and woodworkers who demand precision, reliability and versatility on the job.
It is Included with 10" 24T TCT Saw Blade (311128), Pivoting Flip Fence (326704), Dust Bag (322955), Vise Assembly (322952), 10mm Box Wrench (940543), Material Support Extension (321549) in addition.
Best 12 inch miter saw
This DEWALT DW715 is 12 inches miter saw and single bevel with powerful 15 Amp motor provides the quick, accurate cuts if you are cutting baseboard or a crown molding by offering a no-load speed of 4000 rpm.
Its 45-degree bevel cuts through dimensional lumber that measure up to 2 by 8 inches. It is also have the convenient features of crosscutting as well as miter cutting.
For ameliorate productivity and easy set up it has the stainless-steel miter detent plate and it features 11 positive stops like 0, 33.9, 45 and 48 degrees. An easy adjustment can be done with cam lock handle that delivers quick and perfect angles.
It also permits you to set up the miter detent override without letting the saw to slip into the detent.
The wide capacity of 0 to 50 degrees to the left and right gives multifaceted feature to the saw. The 5-1/4-inch crown molding and 6-1/2 inches base molding that nested vertically takes the support of tall fence, since it can easily slide out of the track when you want to make bevel cuts.
The special bevel cut set up that counts the measure range of 0 to 48 degrees from left and 0 to 3 degrees to right assists to work on big sizes. It weighs 42 pounds and a build in handle is a special feature for quick mobility.
In addition, it comes with a durable carbide blade, a blade wrench, and a convenient dust bag.
Best 10 inch miter saw
Hitachi C10FCG is an 10 inch miter saw which has 15 Amp motor that delivers high power even to cut heavy weighted material. To support its length, a large table with vice clamping system is attached to it.
The increasing flexibility of the miter saw depends on its 0-52 degrees angle range to both the left and right. Its thumb activated positive stops assist for quick miter adjustments. The 0-45 degrees range to the left provides you the clean and accurate incision.
It weighs about 24.2 pounds promotes the maneuverability and uncomplicated transport. The airborne particle that accumulated due to the slashing the material will be gathered by the dust collector that’s been attached to the miter saw.
It is included with 24T TCT saw blade (311128), Dust Bag (322955), Vise Assembly (322952), Hex. bar wrench (5mm), Holder.
Best sliding compound miter saw reviews
DEWALT DWS780 is a 12-inched double bevel sliding compound miter saw which can satisfy all type of works for cabin makers, trim carpenters, framers, installers and contractors in the delicate wood working to heavy duty framing and deck building.
This model has the special feature of an improved ultra-bright LED light that casts its shadow thus showing the exact location where the saw comes into contact and makes the cut on the particular surface of the material.
It has extremely slid construction and new XPS cross-cut alignment. This unique alignment helps to store the position and angle of the miter even after changing the blades unlike traditional laser guides.
It has rugged guards, precision machined castings, fence and bevel system with tough stainless steel miter detent plates for its diligence in work place. The 15 Amp motor which can deliver 3800 rpm eradicates interference with the slide.
6-3/4-inch vertical capacity, 7-1/2-inch nested crown capacity, 13-7/8-inch horizontal capacity, and exclusive back fence design that cuts up to a 2x16 at a 90-degree angle and 2x12 at a 45-degree angle that offers the industry leading combination of cut capacities.
It has high visibility scale and easy angle adjustments of bevel from 0-45 degrees with its positive stops at 0, 22.5, 33.9, 45, 49 degrees in both right and left directions.
The miter adjustments of 60 degrees to the right and 50 degrees to the left of detent plate with 10 positive stops that allows to override the saw without falling into detent.
It is included with one carbide blade, one blade wrench, one dust bag, and one vertical material clamp. Read full review of Dewalt DWS780 here.
Best sliding miter saw Reviews
Bosch GCM12SD is a 12-Inch Dual-Bevel sliding Miter Saw. It operates on 120 v and has patented axial-glide system for precision and control. We have covered detailed review of Bosch GCM12SD in separate post with video by customer who used it for 3 years.
It is undoubtedly great sliding miter saw and has many worthy features which helps you to complete your work accurately and quickly.It has one handle and hand material made from wooden, laminates.
Dimensions and the weight :
Its packaged dimensions are 31 x 23.8 x 22.5 inches and weighs about 88.2 pounds.
Best cheap miter saw
DEWALT DCS361B is 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides an average, 183 cuts of 2x4 Pine or 275 cuts of 3-1/4 Pine baseboard. It has integrated XPS cut line cross cut positioning system that requires no further adjustments for appropriate visibility and accuracy.
The productivity of the perfect incision is ensured by the stainless stall detent plate that has 11 positive stops. Since it is very compact and light weight of 30 lbs, it can be transported to anywhere easily.
The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3 Degree to 48 Degree left with capacity to cup 3 5/8 inches nested crown and 3 ½ maximum vertically along with 2x8 inch horizontal cut.
The over-sized bevel angle adjustments can be done at the scale for accuracy and easiness to cut the material. The quick and perfect miter angle can be set at the cam lock of the handle. It is budget friendly miter saw in the market with nice features.
Things to consider while buying the best miter saw for money
There are certain things to consider while choosing a miter saw. When you want to do a simple cut and trim work, a basic model miter saw is good enough. Read
Read Expert tips to Replace a Miter Saw Blade easily. Also check maintenance tips of miter saw.
But when you really want to create a new product a special saw-like compound and sliding compound miter saws are highly recommended. Whatever the saw may be, some of the features are mandatory to be observed like:
Though the concentration on some of the features like dust collection bag and laser guiding system may kept low but the ultimate user should have an eagle on the safety feature as it may endanger the life. Bevel of the saw also plays a crucial role in the incision. They are
i. Single bevel miter saw
ii. Double or dual bevel miter saw
Single bevel miter saw:
If you have projects in which you need to make angles cuts in two planes, then choosing a single bevel compound miter saw is a good choice. The fact is, this type comes with a pivoting function so that you can make angled cuts on the right or left.
It is still possible to make bevel cuts, but you can only do this in one direction. This is the main reason why this type is called “single bevel”. In other words, it is possible to make bevel cuts, but you must know that you can only do it in one direction.
There is a solution available if you want to make bevel cuts by using a single bevel compound miter saw. You need to flip over the work-piece physically, and this procedure should be done carefully.
Otherwise, you don’t get the correct angles. You need to discard the material and start again with the new material. This can cost you a lot of money.
Dual or Double bevel miter saw:
Using a double bevel compound miter saw, there is no need to flip over your workpiece if you want to make bevel cuts on the right and left. By choosing this type, it is easy to make repeat cuts when you are working with pieces like crown molding.
It can be used for cutting trim, four by four posts, or other things from which you want to produce multiple usable pieces. In addition, you can also save more time.
Check below video explaining miter saw basics.
Miter saw make the cutting life more easy and effortless when compared to the other methods of getting the job done. One may have a simple cut works or a complex one, choosing a perfect tool wisely will decide the final output. Although you get some miter saws for cheap price, we recommend you to check all features, pros and cons before buying.
There are types of miter saws depends upon their sizes, capabilities, cost and special features. If you do not require crosscutting of large lumber stock or complex beveled cuts, go with a more affordable miter saw.
If you are tackling more complicated projects on a regular basis, then we suggest you to go for a double-bevel sliding compound which will definitely get your money's worth.
We hope above reviews of sliding, compound, sliding compound miter saws helped you to take proper decision in buying best value miter saw in your budget.