Best miter saw blade reviews : 10, 12 inch for trim, hardwood etc

Best-12-inch-miter-saw-blades

It is very important to choose right miter saw blade when you want to have fine miter cutting and trimming for your woodworking projects in jobsite. After tedious research of 58 hours by testing number of brands, we have listed 5 best miter saw blades with reviews below. Check top selling miter saw blades in Amazon.

In order to have fine cut, you need chop saw blade with more tooth. But, sometimes too many teeth cause problem of rough cut due to blade binding as the gullets between them are small and you have to slow your cut speed.

I have chosen miter saw blades of proper tooth count by keeping all these in mind and only minimum sanding required if you use correctly. Also read buying guide to choose top rated miter saw. If you are planning to buy cheaper miter saw stand then check this guide.

​80 vs 100 tooth miter saw blade

​Read below comparison between 80 vs 100 tooth miter saw blade.

SaleBestseller No. 1
Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood and Wood Composites, 12-Inch
595 Reviews
Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood and Wood Composites, 12-Inch*
  • Axial shear face grind cleanly Shears through wood for a superior quality finish
  • Ultra-thin kerf design for fast and effortless cuts
  • New advanced laser-cut Stabilizer vents absord noise and vibration, and prevent...
SaleBestseller No. 2
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
527 Reviews
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade*
  • Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
  • Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
  • Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
SaleBestseller No. 3
Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor, Red
252 Reviews
Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor, Red*
  • The product is 12x80T Diablo Blade
  • Easy to use
  • The product is manufactured in Italy
SaleBestseller No. 4
DEWALT 10-Inch Miter / Table Saw Blades, 60-Tooth Crosscutting & 32-Tooth General Purpose, Combo Pack...
1,390 Reviews
DEWALT 10-Inch Miter / Table Saw Blades, 60-Tooth Crosscutting & 32-Tooth General Purpose, Combo Pack...*
  • Tougher tungsten carbide stays sharper longer
  • Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.
  • Computer-balanced plate reduces vibration for improved accuracy and better finish
SaleBestseller No. 5
DEWALT 12-Inch Miter Saw Blade, Crosscutting, Tungsten Carbide, 80-Tooth, 2-Pack (DW3128P5)
790 Reviews
DEWALT 12-Inch Miter Saw Blade, Crosscutting, Tungsten Carbide, 80-Tooth, 2-Pack (DW3128P5)*
  • ACCURATE CUTS: DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter...
  • TUNGSTEN CARBIDE: Tougher tungsten carbide stays sharper longer
  • THIN KERF: Thin kerf for fast and smooth cutting action
Bestseller No. 6
CRAFTSMAN 10-Inch Miter Saw Blade, Combo Pack (CMAS210CMB)
188 Reviews
CRAFTSMAN 10-Inch Miter Saw Blade, Combo Pack (CMAS210CMB)*
  • Induction-brazed Carbide tips for durability and long life
  • Heat-treated plate eliminates warping
  • Precision ground teeth for smooth, accurate cuts
SaleBestseller No. 7
DEWALT 12-Inch Miter Saw Blade, ATB, Thin Kerf, Crosscutting, 1-Inch Arbor, 80-Tooth (DW3128)
228 Reviews
DEWALT 12-Inch Miter Saw Blade, ATB, Thin Kerf, Crosscutting, 1-Inch Arbor, 80-Tooth (DW3128)*
  • Thin kerf for fast and smooth cutting action
  • Computer balanced plate reduces vibration for improved accuracy and better finish
  • Wedge shoulder design puts more steel behind each tip for increased durability and...
Bestseller No. 8
DEWALT 12-Inch Mitter Saw Blade, 80-Tooth, 2-Pack (DW3128P5D80I)
150 Reviews
DEWALT 12-Inch Mitter Saw Blade, 80-Tooth, 2-Pack (DW3128P5D80I)*
  • Thin kerf for fast and smooth cutting action
  • Computer balanced plate reduces vibration for improved accuracy and better finish
  • Exclusive wedge shoulder design puts more steel behind each tip for increased...

Last update on 2020-06-06 / Affiliate links / Images from Amazon Product Advertising API

best 10'' miter saw blade

​Comparison Chart

Parmeters

Makita A-93681

Freud

Dewalt DW3128P5

HITACHI 115435 VPR 

Forrest CM10806105 

​Image

​Blade size

​10 inches

​12 inches

​12 inches

10 inches

​10 inches

Dimension 

​12 x 11.8 x 0.2 inches

​12 x 12 x 1 inches

​17 x 13.6 x 0.6 inches

​1 × 1 x 1 inches

​11 x 11 x 1 inches

Weight

​1.75 pounds

​3 pounds

​4.8 pounds

​1 pound

​2.2 pounds

Material

​Carbide

​Carbide

​Carbide

Tungsten carbide

​Carbide

​Teeth

​80

​96

​80

​60

​80

Price

Top rated Miter Saw Blades

  • 1
    Makita A-93681
  • 2
    Freu​d
  • 3
    Dewalt DW3128P5
  • 4
    HITACHI 
  • 5
    Fo​rrest

Miter saw Blade Reviews

Best 10 inches Miter saw Blade : Makita A-93681

best 10'' miter saw blade

Makita A-93681 is an undoubtedly the top rated 10-Inches miter saw among different branches in the market. It is 80 Tooth Micro Polished miter blade and cut Hardwood, Softwood, and Plywood perfectly. Read makita-ls1216l miter saw review.

If you want to do crosscutting, it will give great fine cut. Some of buyers asked us whether it will fit 5/8" arbor. Yes, it fits perfectly. Check the best tool box review.

We recommend you not to use for cutting aluminum. If you want, then only use on soft one and also do not use continuously on metals.

Buy a separate dedicated blade for cutting metals like aluminum. This blade will cut the laminate flooring really well and it will cut hardwood very easily like hot knife on butter. 

This is the best 10 inch miter saw blade. 

Dimensions and the weight :

This ​​Makita A-93681 dimensions are 12 x 11.8 x 0.2 inches. It weighs about ​1.75 pounds.

PROS

CONS

  • ​Strong and sturdy
  • ​Superior quality
  • ​It will last Longer
  • ​Economical and worth the money
  • ​Gives very smooth cuts on hard wood etc.
  • ​Cannot be used to cut metals

Best 12 inches Miter saw Blade : Freud

freud 12 inch blade

This Freud 12'' 96 tooth crosscutting saw cutting edge is made for glass-smooth completes on both delicate and hard kinds of wood. Its high thickness carbide gives a sharp edge and a perfectly complete, drastically expanding its cutting life.

The miniaturized scale grains are considerably littler and high thickness for less wears.  It has laser-cut hostile to vibration vents that are in charge of the faultless complete.

However they additionally help deliver as meager commotion as would be prudent. It includes a tri-metal brazing which is sandwiching copper between layers of a silver amalgam that give additional adaptability and effect protection.

Its cutting edges are covered for assurance against erosion and pitch develop, which is another element enhancing the cut and drawing out the saw's life expectancy. This is the best 12 inch miter saw blade.

Dimensions and the weight :

​This ​​Freud dimensions are ​12 x 12 x 1 inches. It weighs about ​​3 pounds.

PROS

CONS

  • No sanding required
  • ​No Stabilizers needed 
  • ​Perma-Shield Non-Stick Coating
  • ​laser-cut anti-vibration slots
  • ​Anti vibration design
  • ​Gives glass smooth finishes
  • ​Bit pricey

Dewalt DW3128P5 Compound Miter Saw blade 

Dewalt compound miter saw blade

The DEWALT DW3128P5 32T ATB crosscutting saw sharp edge arrives in a 2 pack. This harder tungsten carbide saw remains more honed longer and gives a smooth and quick cut with its thin kerf dewalt miter saw cutting edge.

Its exactness is enhanced by PC computed adjusted plates, lessening vibration and giving a superior wrap up.  In a standard buy, you get one 80 teeth sharp edge and one 32 teeth, furnishing you with greater flexibility.

The 32 teeth one is made for broadly useful, while 80 teeth will give you a better wrap up. The two saws are 12'' in width.

Dimensions and the weight :

​This ​​DEWALT DW3128P5  dimensions are ​​17 x 13.6 x 0.6 inches. It weighs about ​​​4.8 pounds.

PROS

CONS

  • ​Gives good accuracy and better finish
  • ​3-year warranty
  • ​Computer balanced plate reduces vibration
  • ​​Fast and smooth cutting action
  • ​Prevent breakage and ensure precision
  • sturdy and the teeth are quite sharp
  • The kerf of the blade is thinner than full
  • The carbides are very small
  • ​Gives minimal vibration dampening

HITACHI 115435 VPR Miter blade 

Hitachi chop saw blade

This HITACHI 115435 VPR miter saw ​blade is superb for both softwood and hardwood, and a wide range of timber or plywood and MDF, giving a fine cut in all cases. Check Hitachi miter saw review.

It is made from micrograin tungsten carbide which increases durability and useful for OSB or arranged strand sheets, which is known in the U.K. as sterling, or flake board.

The saw is good with all miter saws and can create a most extreme 5,800 RPM which is very critical and essential for fine wraps up.

​It has been adjusted with high accuracy against pressure to lessen the sharp edge vibration amid cutting, particularly helpful when cutting hardwood. It will satisfy for all cutting needs from framing and ripping to fine finish woodworking.

Its 10 inches or 250 mm in measurement, so it is usable for most contraptions regularly utilized at home or at development locales. 

The thickness is .094'' or 2.4mm, adding to its exactness colossally. It has an Electrophoresis coating which prevents from rusting of blade 

Dimensions and the weight :

This ​dimensions of this HITACHI 115435 VPR are 1 x 1 x 1 inch. It weighs about ​​2.2 pounds.

PROS

CONS

  • Good with all miter saws
  • ​Adjusts against pressure
  • ​High Accuracy
  • ​Electrophoresis coating
  • ​Not toughest ​blade

Forrest CM10806105 

Forrest CM10806105 Chopmaster

The Forrest CM10806105 chop master is an ATBR miter and radical saw cutting edge. It's made of twofold hard C-4 carbide 40% more grounded than the standard kind, promising up to 4 times longer life in the middle of each sharpening Forrest miter cutting edges.

The saw cutting edge is 10 crawls in width and has 80 teeth. This is vital the way things are for a fine complete; however it may not be most appropriate for general utilize.

Additionally, it gives second-step wrap up, no jointing or sanding subsequently, which spares a considerable measure of time and exertion. The edge utilizes a 5/8 inch arbor, and is usable on all miters and in addition a radical saw edge.

The delayed honing term will pay off rapidly, as the edge remains sharp 4 times longer than abnormal saw, which draws out its life by that much.

This Forrest CM10806105 chop master saw cutting edge guarantees an enduring life and sharp, smooth completes the process of, sparing you both time and cash over the long haul. It is a standout among other miter edges available.

Dimensions and the weight :

​This ​dimensions of this Forrest CM10806105 ​are ​11 x 11 x 1 inches. It weighs about ​1 pounds.

PROS

CONS

  • ​Gives good crosscut
  • ​Economical and worth the money
  • ​Cuts smoother than some 96 tooth blades
  • ​Goes dull much faster than ​other brands

Things to consider while buying right miter saw blades 

There are many factors to be considered while buying proper saw blade. Most important thing is choosing the right size for the miter saw.


Miter ​blades can be found in an assortment of sizes, abilities and value ranges, contingent upon what you're searching for.


 Even professionals and DIYers get a bit confused while choosing a saw blade. Check comparison of ​DEWALT dws779 vs dws780 here. 

When you are handling your woodworking projects, we expect to have cut with precision and accuracy. You need to have different types of  saw blades to handle specific projects.


For this you need right miter saw blade which can do trimming, crown molding, picture framing, cutting metals like aluminum and hardwood. Check reviews of dewalt dws780, ​dws717,​ bosch gcm12sd.

​Types

We already discussed that you would need to choose different saw blade depending on the type of project you want to do. The first thing that you need to know is that there are different types of miter saw blades. They are listed below.

Reciprocating saw blades- You can choose this if you have a reciprocating saw. These blades are best for cutting drywall, metal, wood etc.

Circular saw blades- The blades are perfect for tilting work and can be used to cut through masonry, wood, and metal.

Fine cut blades- Use this for laminated chipboards, wood core plywood, plywood etc.

Course cut blades- These ​can be used for cutting boards, softwood, and hardwood. Check dewalt vs bosch miter saw comparison.

Material

The Saw blades are manufactured with different types of materials and cost depends on it. Most of them in market are made of steel and they can get dull quickly.


We recommend you to go for carbide tipped blades or industrial diamond finish even though they are expensive, blade will be long-lasting.


They are perfect for ceramic and masonry tiling. Carbide blades are great for cutting aluminum. But, keep in mind that more wearing out will occur when it is used to cut large size metals.

Size and Thickness 

Choose thickness and the length of the saw blade depending on your machinery work. Go for a thinner blade, if you want cut faster and sharper. Consider thicker blade, if you want a durable blade that can cut through metal.

Miter saw blades available from 5 inches to 12 inches sizes. Each size of the blade is fit for a specific saw. So, check your miter saw manual to know the right blade size to pick. 

Type of Teeth  

If you want work on larger cuts, look for blade with fewer teeth. Similarly, if you want to have fine and smooth finish on the edges of the wood, consider blade with more teeth which produces less dust.


And also minimal material wasted. They are different types of teeth like flat top which is ideal for ripping hardwood, top bevel teeth and combination teeth good for ripping and cross-cutting.

Type of saw you have 

You need to check what the type of saw you have is. For instance a circular or a table saw needs different to other one. You can use the blade in more than one saw but it may not apply always.


Every saw has a specific type of blade that is recommended, for this check the packaging or on the blade to know which one will work fine.

Applications 

There are numerous applications of saw blade. We have listed 10 important uses at different projects.

  • Trimming
  • crown molding
  • laminate flooring
  • picture framing
  • fine cuts
  • cutting aluminum
  • Wood working projects
  • Baseboards
  • Hardwood flooring
  • Miter joints

​Conclusion

We hope this guide helped you picking the best miter saw blade for trimming and wood works. I strongly recommend you spending money on a quality saw even if it is a bit pricey.

In the long run, it will save you from wear and tear so that you do not have to make frequent replacements. The bottom line with these chop saw blades is they are all well made and will get the job done as long as you use them correctly.

Use a general purpose blade, when you want to cut thick stocks like 2×4’s or 4×4’s. But, to cut 1 inch stock or thinner, pull out one of these fine cutting blades to make a cut.